sweater
Confession Tuesday : My kingdom for a ball winder!
Fellow crafters, today I have a confession to make : I do not own a ball winder. Yea, shame on me. I really wish I did own one, things would be so much easier, but I just never bought one. For me, starting every project requires hours of preparation; winding every ball by hand, untangling knots and fighting off playful cats, and sometimes it also comes the occasional tears of rage when things are not going my way. Yea.
I really didn’t mind it so much at first, because I thought : “Not every yarn that is sold out there needs to be winded, so why should I make a fuss about having to wind a few balls by hand here and there?” But as time passed, I slowly started to realize that most of my favorite yarns did not come in center pull balls, and that my handspun yarn needs to be rolled in a skein or a ball after coming off the wheel. So why do I not have a ball winder and a swift, really?
The reason I’m talking to you guys about this is because I just recently came to a halt in my Hollywell Cardigan as I finished the first pink skein, and I had to wind the second skein into a ball before I could resume knitting. As I was patiently winding it, I looked over at my project and realized that in a very short while, I would also have to start the stripes – so I would have to put down the needles again, and wind 2 other skeins by hand. I’m usually not much of a complainer, but I must say that at that point, realizing this made me a little upset. But since today is another day, let’s just try to focus on something fun (!) instead, and let me show you the progress I’ve made on my cardigan so far :
The pockets are attached, and I’m almost done with the waist decreases, so things are really moving along at a good pace! I should already be done with the waist decreases, but I decided to give this cardigan a little bit more waist shaping than it originally had, since I’m (somewhat of) a curvy kind of Gal. I’m about a medium size overall, but I have rather large hips and a (somewhat) thin waist, so every sweater generally requires slight modifications to fit my unusual silhouette. I started it off with 248 stitches at the bottom, which was in-between size M and L, and I plan on decreasing until I reach 204 stitches, which is a little over size S. Then, I plan on increase stitches at the same rate, and finish the pattern following size M instructions. Even though I made so much progress on it, I still feel the fabric is very loose and uneven, so I really hope it’ll turn out OK after a good wash. It should, since the swatch turned out just fine after a run in the washer & dryer, but I’m still worried. Just have to wait it out, I guess.
On another note, I was blessed with very good news last week, as I got a message from krumel, the (amazingly!) nice Raveler who gave some of her time earlier this summer to test-knit my very first sweater pattern, the Summer Sea Stripes Sweater. She told me she just finished it and showed me a few pictures, and I must say I am simply AMAZED that someone could make something so beautiful with a pattern I wrote! Even her photos are a lot more professional than mine, I feel so ashamed of myself! -_-‘
The one on the left is my prototype, and the one on the right is the one krumel made following the pattern I wrote :
Since it is my first pattern, I have a lot of adjustments to make before I can really publish it, but things are definitely moving forward! Following krumel’s comments and suggestions, I’ll fix my pattern in the next few weeks, then get version 2 tested sometime in September and (if everything goes according to plan), I should be able to release it on Ravelry around the end of September or mid-October. Yay! 🙂
I’m not sure if it’s normal to be so thrilled about something so trivial; I have never published a pattern of my own so I don’t really know how but I feel so very excited! Any experienced pattern designers out there? How did it feel to publish your first design?
So that’s all for today folks, my rant’s over!
Hope you all enjoy your craft time, and the rest of your summer 🙂
Because everything is nicer on vacation.
While spending the last 13 hours in a car Saturday, I’ve had a chance on the way to pick up my needles and finish my sweater for the Nice&Knit summer sweater knit along (#NKKAL). I’m definitely very happy about how it turned out!!
http://ravel.me/saphirsteph/sbThe TDF has been going pretty good so far, I have been able to spin a brand new skein of yarn last week, full of colors. I used a combination of yellow and blue corriedale fiber, and although it didn’t turn out as soft as I would have expected, I’m definitely happy about the color scheme. And the best of it all is that with this skein, I was able to achieve one of my TDF goals, which was to spin a finer yarn! This one is about fingering size and is mostly constant, it’ll definitely be a charm to knit!
http://ravel.me/saphirsteph/ninsThe only down side about this yarn is that I think I put too much spin in it when I plied, and the finished skein turned out much more twisted than I would’ve wanted it to be when I got it off the wheel -_-‘ Even the cat was making fun of me!! I had to let it soak for a long time to let the twist set, and stretched it out real good as it was drying. Oh well.
I still have 2 ounces of blue and 2 ounces of yellow that I’ll spin as solid colors, and I’ll combine the 3 skeins to knit the Comptown Races Cowl with it. Isn’t going to look amazing?? I cannot wait to start it! So since my fiber stash has been shinking considerably, last Thursday I decided to stash up again on fiber, and I went for the first time to a little shop located in Nicolet, Québec called the Julie Factrie. I really liked the place, and thought it was cute and quaint (and full of my favorites!). The shop owner, Julie, is a real fiber artist, and it was a pleasure to chat with her for a little while. I left with mostly solid colors this time, and I’m really looking forward to spinning those into wonderful and colorful skeins.
The heat of the moment! (and TDF?)
These past few weeks, I have been stashing up on fiber for the Tour de Fleece, and it’s making me feel very, very good. For those who might not know what it is, the Tour de Fleece is the fiber spinner’s version of the Tour de France, the cycling competition – we spin as they spin, and we try to match the hardest parts of our challenges to the hardest parts of the Tour. The big idea is to set yourself goals to achieve in the duration of challenge, which started this year on July 5th and will go on until July 27th. The goals you set yourself can be anything you want them to be – from learning how to spin to spinning 10 minutes every day to spinning 30 ounces of fiber. There’s a ton of groups you can join, a lot you can learn and definitely a lot of fun to have. So since I’m still relatively new to spinning, I set myself 3 very realistic goals that I think I can achieve before July 27th :
1) Spin finer and more consistent singles (ideally reaching the equivalent of a sock yarn)
2) Learn Navajo plying
3) Learn how to spin cotton
This challenge has made me very, very excited and although it started only a few days ago, I already completed 2 spinning projects; one using a 100% merino fiber and the other one using a 70/30 Merino/Silk fiber. I can definitely tell that the singles in these two projects are a lot finer and a lot more consistent than what I’ve been doing so far (the green one is about DK size), but there’s still room for improvement.
I will be away on vacation for a good part of the TDF (going to Ohio July 12th through July 21st), but I will definitely keep spinning, since I decided to take my spinning wheel with me to work on my challenges on our spare time. A change in scenery is going to be very much welcomed, but the 12 hour drive there – without air conditioning – in the summer heat is going to be dreadful. hopefully, while we’re there we’ll be able to do lots of fun things like going to the zoo, having campfires and eat marshmallows.
In the meantime, I have been trying to focus on the Nice & Knit Summer Sweater Knit Along, that I really want to finish ASAP. I originally wanted to finish it before the TDF starts, but I guess it just didn’t happen. I finished the body yesterday, so now only the sleeves are left. I think part of the reason why I haven’t finished this project sooner is because of the crazy heat wave we’ve experienced the past few days. Isn’t it hard to focus on knitting a sweater when the heat makes you feel your body’s melting on the couch? Thermometer has been marking 88°F, but with humidity it’s jumping to 99°F. Urgh! Fortunately though, we’ve had rain yesterday and today that brought around cooler temperatures – so I picked up my needles again 🙂
On a lighter note, Saturday, I went to Artfil with a few friends for a social stitches afternoon, where we had a chance to chat and happily work on our projects or learn new crafts together. I had a lot of fun, and definitely appreciated the much needed girl-time.
So that’s all folks, enjoy your craft time 🙂
What’s cookin’
Yesterday was a holiday for me (June 24th is Québec’s national day), so I took advantage of the day off to make some progress on my sweater for the Nice and Knit summer sweater knit along (NKKAL). I created the pattern from scratch and named it the Sea Breeze sweater, the idea sprung up from the really beautiful Kit Camisole Cassy posted on her blog (knit the hell out), you should definitely check it out. I thought the linen stitch that was used in this pattern was so pretty that I just had to use it somehow in my summer sweater project, so I came up with a plan. And to complement the nice stitch, I decided to use very soft summer colors; including a pale blue, baby blue, lavender and aqua. This yarn is really nice to knit with, it’s a 100% mercerized cotton from Austermann, you can buy it on Artfil’s website (you’re welcome). At this point, I have almost reached the waistline, so it’s really starting to look like something. I really can’t wait to finish it!
http://www.ravelry.com/projects/saphirsteph/sea-breezeOn a different topic, I also spun last week the last bit of fiber I had 😦 So no more spinning for me this week. Do not worry though, I have a (considerably large) fiber order on its way, and this one should last me for a little while. Since I have been mostly working with wool recently (BFL, Merino, Merino/Tencel, etc.), I decided to widen my horizons and (on top of the few ounces of wool I ordered) I also order different types of fiber I have never spun before. I ordered bamboo, 1lb of natural bleached cotton (so I’ll also be trying my hand at dyeing – W00t!) and an 8oz of merino/silk fiber. I simply cannot wait to get them! Weehee!
So the last thing I spun was 8oz of Malabrigo Nube 100% merino fiber, in the colorway Baya Electrica. The singles were (as a general rule) a lot finer and a lot more consistent than my previous spinning attempts, and the final result turned out to be about 1040 yards of Worsted/DK weight yarn in 2 skeins 🙂 The result blew me away, the colors just pop right up! Somehow, I noticed though that it’s a color that’s not very photogenic and the pictures really can’t compare to the real thing; but here’s one to at least give you an idea :
http://www.ravelry.com/people/saphirsteph/handspun/cheshire-catI affectionately name it Cheshire Cat. I think I’ll be making a sweater out of it, maybe something like the the Pull me over ? or maybe the Briar Rose Tunic ? I’m not quite sure yet. Anyways, there’s still plenty of time left to decide since I’m not even half way through my Sea Breeze Sweater, and I still only have about a third done on my Spring Leaves shawl. Plus, I might not be knitting all that much this week since there’s a rhubarb pie recipe that I absolutely have to try. Hmmmmm, scrumptious!
So that’s all for today folks 🙂 Enjoy your craft time!
SSSS : Summer Sea Stripes & Stuff
So I made a sweater. Again. Hahahaha 🙂
I was so excited to have learned so much making my first sweater, the Feather & Fan Lace Sweater, that I wanted to apply all that newly acquired knowledge to another project right away! And I did. I present you today my second sweater, the Summer Sea Stripes! It’s not completely finished yet (I still have to make the sleeves) but I’m pretty happy about how it turned out so far!!!
There are still a few mistakes here and there (which project is perfect, really?) but I’m much happier about the fit of this one compared to the first one I made. My first sweater was made to measurements, but realized after wearing it a few times that I did not like the fit so much as it felt kind of baggy and stretchy. To fix that problem, I decided to make my second sweater with 2 inches of negative allowance to give it a snugger fit. And it worked perfectly! It is just SOOOO comfortable and so nice! I couldn’t be happier about how it turned out!
And the colors! Oh My God, The Colors! I designed this pattern to maximize the yardage I had in both colors, but I must say it turned out way nicer than I expected! Both are 75/25 Superwash Merino & Silk sock yarns, very soft and very smooth, with a lovely drape and an exquisite sheen. The black yarn is Cascade Heritage Silk that can be purchased both on Little Knits or on Webs (you can check out the Craft Ressources page of my blog for links to both these online yarn stores. You’re welcome!), I used 1 skein of it for my sweater. The blue yarn has got to be my best discovery of the month. It’s the Squishy Sock yarn, an exclusive product made by Chroma Fiber for the Artfil Yarn Shop & Craft Café, a little yarn boutique my friend Yana recently opened in Laval, Quebec. It is 356 yards of scrumptious deliciousness, hand painted by a local artisan in Montreal. It is simply gorgeous. If you’re interested, you can find it in store at the Artfil Yarn Shop & Craft Café, or you can buy it online on their website at http://www.artfil.ca/products/chroma-squishy-sock.
I recently made a review for this yarn, if you’re interested in reading it you can find it here.
So happy stitches guys, I’ll see you next time with another project (not a sweater again, I promise!)
Cheers!
To machine wash or not to machine wash, that is the question
Hey folks!
I hope you all had a good time over the Easter weekend, I had a MARVELOUS time in Cape Cod. Since it’s only April, we could barely take our coats off, let alone swim in the ocean; but even if we couldn’t swim, we saw beautiful landscapes, cute and quaint little villages and we could walk barefoot in the sand. Isn’t bliss? If you’re interested to see the pictures, just click on the the one just below, and you’ll be redirected to the album.
On our way back, we got stuck in traffic in Boston for 2 hours because of a accident that left a semi-truck in flames on the Leonard P. Zakim Bunker Hill Memorial Bridge. I can tell you we didn’t expect that. Although it was very unfortunate, it also allowed me to put the last stitches on the sweater I couldn’t finish before we left for Cape Cod, so it made the whole process a lot more bearable 🙂
After washing it, the sweater is a perfect fit and it is SO VERY COMFORTABLE. I’m so proud!!! There are a few oopsies here and there and I’m not super satisfied with the neckline, but for a first try (and without a pattern!) I think I really came up with something good. I must say, I’m also very happy that the sweater made it fine through the washer and dryer cycle. Oh I can hear you scream from here… YES, I did put my hand knit sweater in the washer and dryer. “Why”, you say? Because… well… I’m lazy. All my clothes (and I’m weighing my words here) ALL my clothes go washer and dryer. And I know that if I make an exception and buy (or knit, or sew) a sweater that needs to be hand washed, I simply won’t wear it.
So because I know that, and because I really want to wear the things I make, I simply choose my yarn and test swatch knowing it’ll go in the washer and dryer. And it works! Look at that!
http://www.ravelry.com/projects/saphirsteph/my-first-sweater-everSweater-y weather
Hey-ho Fellow Crafties!
Today, I want to talk to you about my latest adventure : the Oh-my-god-I-want-to-knit-myself-a-sweater adventure! It started a few weeks ago; the weather has been warming up a lot here recently, and the snow is slowly melting away. It smells more and more like spring every day, and the warmer days inspired me to retire my winter coat for the season and use lighter and more colorful clothes to match the nice weather.
That said, I have been CRAVING a hand knit sweater so bad that I just couldn’t resist when I saw the most scrumptious blue balls of Bamboo Pop yarn I found as I was out shopping, so I bought 4 balls, and set off on a new adventure! Now, I must mention that I have never in my life knitted a sweater. I sew a sweater once or twice, but never have I actually knitted a piece of clothing other than a shawl, a scarf, socks or hats. I have never knitted a swatch either, because size has never really been an issue. Who cares if a scarf is 9 or 10 inches wide, really? And to top it all off, I had so many unanswered questions, like how exactly am I going to shape the shoulders? Or the neckline?
To give myself a better idea of what I was getting myself into, I first started by looking at sweater patterns, but I quickly realized it probably wouldn’t be a very good idea because I (very honestly) couldn’t visualize how it would come together. I really felt that if I just blindly followed the instructions given on a pattern, the sweater I would make wouldn’t fit as good as it should because it wouldn’t be adapted to my own body and measurements.
After coming to that conclusion, I instead decided to look for videos or tutorials on how to make your own sweater from scratch, and I found this very helpful series of videos from Knitpicks on YouTube that showed me exactly what I needed. You can find the first video of the series here.
I learned in that series of videos how to swatch, calculate my stitch counts and how to shape the sweater according to my body measurements and my knitting gauge. Strong from all this new information, I grabbed a pair of needles and my yarn and I started the project. Instead of making the sweater bottom up like they suggest in the video, I decided to adapt it to make it top down. I have never made a sweater before, so I have no idea if I have enough yarn to make a long sleeves sweater or not. By doing it top down, I can simply adjust the length of the sleeves the match the amount of yarn I have left at the end, so I figured that would be the most appropriate way to do it in my case.
Knitting a sweater is obviously a very slow process, even more so because it’s my first one and I’m not entirely sure of what I’m doing (Who am I kidding, really… I have ABSOLUTELY no idea what I’m doing!). I know I made a lot of mistakes and some spots look kind of weird in my opinion, but I have learned a lot in the process, and I know for sure that my next sweater is going to be a lot better. So far it seems the general shape and the measurements are right, so whatever I did was surely not entirely wrong 😉
I’m going to Cape Cod for the weekend to let off some steam and relax so I’m not sure if I’ll be able to finish it before we leave or not, but if I can’t, I’ll make sure to update this post later to show you guys some pictures of the finished product.
On that note, that’s all for today folks, I hope you’ll all enjoy your Easter weekend and spend some quality time with your loved ones 🙂
Cheers!
- ← Previous
- 1
- …
- 4
- 5
Crafty Effie 