Why hello there. I’ve been meaning to get this post out sooner, but it’s been a very busy few weeks here as I headed back to work from mat leave and been feeling all the feels. And to wallow even further, I am reminded every day how my baby girl is growing so fast and will be turning 1 in just a month now so she will officially be moving into toddlerhood. My baby will be no more!
To keep with the theme, I thought I’d present you a couple baby makes I’ve made earlier this spring. I’m sure you’ve all seen the mini Vinicunca sweater I shared a in April, but I also made a few more projects in the last few months I thought were worth sharing.
First off is this adorable little Lacey Romper from Pippy Eve. I knitted this in Corsica yarn from Berroco, an ultra soft cotton cashmere blend. I made a few small mistakes here and there thanks to my mom brain, but nothing I couldn’t live with. The result is just so cute and soft and dreamy! I installed two buttons on the straps so the length could be adjusted and it could be worn a little longer, but that’s the only (intentional) mod I made on this pattern.
Second is the Marian dress I’ve knitted ages ago, long before I even got pregnant. It was left unfinished as I ran out of yarn, bound it off it in a different colourway, tried to dye it and failed then put it in the pile for a second dye job that took me way too long to get to. Regardless, now it is complete! Ta-da!
While I’m quite happy with the final result and I think the pattern is really cute, I was not very happy about the skirt increases being located in the middle of the reverse stockinette st sections, so if I ever make this again I’ll move the increases to the sides to make them less noticeable. The original yarn used for this project was Cascade Heritage solids in the strawberry cream colourway, which ended up being dyed a deep bluish purple. If you’re wondering what it looked like in pink, here it is – I’m definitely glad I took the time to dye it as I like the deep blue-purple so much more!
Last is this faux cable sweater/dress I made using leftover Modern Cotton DK and s skein of Debbie Bliss Eco Baby Prints cotton yarn in pool blue. There is no pattern, I just kind of winged it on the fly. It’s not perfect but it’s cute!
Thank you to all those who made it this far and hope you all have a great summer!
I’ve been hoarding books and toy patterns for years now, and although I find them so cute and cuddly and had all the intentions in the world to make cute adorable plushies for the little ones around me, I have to admit that I only ever knitted a toy once, roughly 5 years ago. So last month, I decided to change that.
I dusted my toy making books, dug through the yarn leftovers and odd skeins I couldn’t find a use for and started making. And low and behold, I ended up making many more than I thought I was going to. Without further ado, let me now present you my humble little plush toy collection.
Those squishy fluffy faces come from a few different sources, so please let me walk you through.
The two siblings were made using Susan Claudino’s Voodoo you love me? , a sweet and simple pattern I’ve really enjoyed making. The instructions are super clear, step-by-step and easy to understand. The big brother was made using an unknown, unmarked yarn ball from my craft room closet. It is most likely an acrylic yarn of some kind in a bulky or super bulky weight. The little brother was made using some Berroco Corsica cotton/cashmere yarn I had leftover from a little baby onesie I made a few weeks ago (more on that in another blog post!).
The bright pink and white bunny is actually a crochet project, which I actually rarely do, so it was a nice change of pace. The pattern is called Framboise, and it comes from a book called Tendre Crochet from Sandrine Deveze. Now I wish I could link you the Ravelry page but it seems that book has not been catalogued right in Ravelry, and some of the patterns contained in the book (like this one, which also happens to be on the front cover) is not listed. But a quick search on Amazon or your preferred book store and I’m sure you’ll be able to find a version of it, it has been translated and distributed in many languages/countries I believe. I made this project using again a couple unmarked, unknown skeins of yarn that look like they’d be a cotton blend in a worsted weight. Now although the patterns provided in the book are all just adorable, I have to admit I wasn’t a huge fan of the construction of this one, as it makes us crochet the body and the head separately and then sew them together. Next time I make this, I’ll start with the legs and body, then switch yarn colour and work the head seamlessly, adding the filling as I go.
The big guy is Hugo, the couch potato monster. It comes from Rebecca Danger’s Big Book of Knitted Monsters. This is a favourite of mine, I’ve cherished this book dearly for years, even though I’ve only ever knitted one before. I made this new one in wonderfully soft Noro Shinryoku. Hugo is a super easy pattern and the final toy is just *SO* squishy!!
The last one I made is the star shaped little guy with a blue hat. This pattern is called Knubbelchen and is a free Ravelry download. I made this one out of leftover Universal Yarn Bamboo Pop and it is just so soft and squishy! The one thing I’m a little sad about is that I didn’t look at the finished measurements of the doll first, had I known how small it was going to be I would’ve kept knitting! But anyways I’ll keep that in mind for next time.
For obvious safety reasons I’ve used safety eyes for all the dolls. yardage info is available for the yarns I could track (i.e. not the unknown/unmarked ones) ok my Ravelry project pages here, here, here and here.
Hope you guys are all fully enjoying the last bits of spring, and I’ll talk to you again real soon. Cheers 🙂
So… something happened. I made a sweater, and it was just so wonderful and perfect and the colours were so amazing that I decided to make another one. A smaller one. A tiny baby one. And I couldn’t be more happy about the result ❤️
So first let’s get the basics down. This pattern is made (once again) by Beatriz Rubio from Sambaknits and it’s called Vinicunca. It’s a wonderful dropped shoulder cozy oversized sweater with tight sleeves. I made it in Berroco’s Modern Cotton DK in colour Gadwall. The contrasting colours are a bit of a closet clean out, I used a mix of what I had in a similar gauge that would fit the colour scheme I was envisioning. There’s Elsebeth Lavold Hempathy in there, Knit Pick’s lindy chain, Katia rustic silk and a couple basic cotton yarns to complete.
I made this sweater in size 2, no swatch, I just eyeballed it. Big mistake. But let’s be real, I just never swatch. I’m not a swatcher, never been, and probably never will be. I don’t care much for gauge, and I like to have variety in my closet so in my hand knit section, I’ve got sweaters of all sizes ranging from dramatically oversized to pretty darn snug, and I kinda like it that way. So back on topic, I didn’t swatch. and I probably should’ve. Because… I’m a tight knitter. And I liked the oversized look of this sweater. So… I ended up blocking the sh*t out of this one until I reached the desired size. NOT RECOMMENDED 😅 but I did. And you know what? It turned out just fine. But I made a slight adjustment for the mini version, and I made a mental note to myself for any other future iterations of this sweater to size up on needle size to 4mm because for this sweater, gauge matters. A lot. Anyways other than needle size I didn’t change much to the pattern. I omitted the sleeve decreases and changed up the number of repeats for the contrasting colours to jazz it up but that’s about it. All the details are on my Ravelry project page as always, including precise yardage, mods, etc.
For the mini version, I did end up making quite a few ajustements, as the pattern isn’t made for kids. It’s not perfect and if I do this again I left plenty of notes on my project page to do a better job next time but overall, I’m still pretty darn happy with the result. And the little lady too, so it’s all good.
So that’s all I got for today folks, I’ll see you again real soon 😉
I know… I looked at the date. It’s been 10 months since I last posted on here. Why hello there, if you are still following, it’s been a hot minute. I’ve been spending the last 7 months trying to adjust to my new life as a mother, and it has not been easy, so I’ve been focusing on that and crafting has unsurprisingly been moved to the back burner for a while. But good news is, I’m slowly adjusting. And I’ve tried to pick back up some of my hobbies during my little bits of free time.
I cannot promise I’ll post often (or that I’ll post at all, for what matters) but hey, I’m here now and I can show you one or two goodies right?
So the FO wanted to show you today is the first project I finished since the birth of my Little Lady. It is a this Tunisian crochet chevron blanket, made in worsted weight Bernat’s Handicrafter cotton yarn, one in white and the other in a blue ombré. Now I tested something because I was lazy and wanted to reduce the (already insane) amount of ends I would have to weave in, so instead of working one row of squares, cut the yarn and start again, I tried to turn the work and crochet the other row of the same colour from the back instead. Not sure if that makes any sense to you? Anyways I wasn’t sure how it would turn out, but I’m actually quite fond of the texture it creates, by having some squares right side facing and some squares wrong side facing. I might actually do this again! The blanket is pretty much lap size, and would be perfect for walks in the stroller, once weather permits. I used all but 10-15 grams of both skeins, and as usual you may find a couple more details on my Ravelry project page.
I’ve also completed a second raindrops sweater, a tincanknits pattern. The yarn I’ve used is a beautiful lush green Fino yarn from Manos Del Uruguay. Now I gotta say there’s more than a couple mistakes in this sweater, as I was having trouble keeping my mommy brain focussed enough to complete this knit. Fortunately for me, the pattern is extremely forgiving, and my many slip ups don’t really show too much. I’ve made a couple mods, including adding sone waist shaping, but other than that it’s very “by the book” – you can find all the details including yardage on my project page. I’m quite happy with the result, and will surely get a lot of wear out of it in the next few months as we transition to slightly warmer weather.
That’s all I had to share for now guys, not sure when I’ll be able to pop back again but I surely will one day (just don’t hold your breath).
Why hello guys! Fancy seeing you here! Happy 2021, although I can’t reasonably say Happy “New” Year in May. How can it be May already?!? Anyways, I just finished last weekend this wonderfully delicate (and festive!) sweater called Mariposa, from Beatriz Rubio (SambaKnits). Now that I think about it… wasn’t my last post a few months ago ALSO about one of her designs? I gotta say… I just love her work!).
Anyways, I started this little baby up back in September, but you know… Work, life and stuff, so I just put the final stitches on it just a few days ago and wow, I’m so happy I finished it in time to wear it at least a couple times before the weather warms up because it is BEAU-TI-FUL!!
The yarn I used is Juniper Moon Farm’s Findley DK, I used all but a couple yards of 8 skeins. It’s a buttery soft 50% silk / 50% Merino yarn and, I mean, guys… Can we talk about the colour? The pictures really don’t do it justice, but this colourway is just stunning. It’s a deep, intense fuchsia that just makes my heart sing.
The pattern is knitted from the bottom up and is meant to be an oversized sweater with dropped shoulders. As dropped shoulders usually don’t suit me all that well (and also because I was lazy and wanted to skip on all the shoulder increases and short rows) I just worked the body as previously established after separating the front & back, bound off the middle stitches for the neck opening and joined the front and back shoulders with a 3 needle bind-off. As for the oversized portion… It definitely WOULD have been oversized, if I had not been 7 months pregnant when I finished it.
No worries though, it will no doubt go back to being oversized once I’ve given birth to my little potato 🙂
As pregnancy has been a bit difficult on me with extreme exhaustion and nausea, knitting (and blogging!) understandably took a bit of a back seat the past few months, but now that I feel better and more energetic it’s been easier to find a few hours here and there to complete the project, and although I originally meant to finish this sweater by Christmas (don’t you think the texture on it looks like little bows on a carefully wrapped present?), I’m still very happy I’ll still get a few weeks of wear out of it before summer arrives.
It is my gift from me to me, before our new little one arrives into this world.
Gosh, has it already been two months already? I’m sorry…
But I’ve been working diligently on this beauty here, and it’s been taking most of my time as I’m not very efficient working cables. Resulting in me being a whopping 3 weeks late on this test knit. Beatriz, my deepest apologies!
Ok, let’s recap here. I signed up in September for another test test knit for SambaKnits, this beautifully textured Colmena Shawl. This is not my first rodeo, I’ve done test knits many times. What I didn’t realize at first though is that the entire textured section is all cables. That’s a lot of cables. And don’t get me wrong, I’ve done cables before and I know how to work them. But I’m not especially good at it. They seriously slow me down, leading me to greatly underestimate the time it would take me to knit this. But let’s pass for now abs let’s talk specs.
This shawl pattern is written for worsted weight yarn, and as always Beatriz was a charm letting us do yarn substitutions. I went for a couple skeins of Motley from Sugar Bush Yarns I had in stash. It is marked as a sport weight yarn but it’s a very thick and thin single that feels more like a DK to me. First surprise: it’s actually a self striping, which is not what I was expecting. How come I didn’t realize this?! Anyways, I decided to roll with it and knit the shawl with appropriately downsized 4mm needles.
I had committed to using the full two skeins I had, saving a third one for a matching hat or a pair of mittens. I did just that by adding one more full repeat of section 4, and working section 5 a total of 8 times instead of 4, all in all adding about 18 rows to the original pattern. I think I did great maximizing the yardage I had, though I ended up playing a fans a yarn chicken in the end abs lost – by about 10 stitches. So I had to borrow 12 inches of yarn from the reserved hat/mitten skein to finish binding it off.
All in all, it took me about 2 months to work through this shawl, which literally is FOREVER for me (thanks to the cables) but I regret nothing. I love this shawl, the feel of it, the colour, the texture, and given the choice I would still do it all over again. If you’re interested please do feel free to check out my Ravelry project page for all the details, and now I’ll hopefully be moving on to Christmas makes (Gosh I’m so so late this year!!)
Folks, I’ve been loving my new Heyday Dungarees so much that the fall weather setting in had me so very bummed I couldn’t wear them anymore (damn those cute cropped legs!) so I’ve decided to whip up another pair of overalls, this time with full length legs so they could be worn this fall / winter.
I used what I’m assuming is a cotton blend in a flowery print I’ve had in stash for the longest time, and I’ve added white accents for the loops, front pocket and side pockets.
I used the same Heyday Dungarees pattern from MBJM, this time around I installed a pocket on the front and omitted the ones on the back and I used the same sort of hack for the side pockets as I did on the first one. Last time I used this fabric, I was under the impression that this fabric had a bit of stretch but turns out it didn’t really, so the final product ended up a bit tight around the hips but I just simply love it nonetheless! It’s cute, comfy and so playful, and I’m sure I’ll get a lot of wear out of it in the next few months.
How’s fall treating you guys?
In the blink of an eye, the warm and sunny days have been replaced by gray, rainy and chilly fall weather here in Quebec, and I just kind of find myself confused asking “Where did summer go?” “How can it be mid-September already?”. Am I the only one feeling that way? I think covid is affecting our time perception in strange ways!
I made this vest in size 33 1/2”, except that I did not switch to size 5 mm needle as per pattern instructions as the vest was already more than big enough on the 4.5 mm needle. The only couple small modifications I made on this pattern were to sew the sides fully and to leave the shoulder stitches on hold instead of binding them off and closed the front and back with a 3 needle bind-off. The pattern is clear and straight forward, although if I do make this again I think I might work it in the round and separate the front and back after the first set of decreases instead. Interestingly enough, the one thing that attracted me to this pattern was the slits on either sides, but after trying it out on me (and this may just be due to how the fabric falls with the yarn I used) I did not like the fit of them on me, I thought it made me look like a potato bag -which, as you can imagine, was not the intended goal. So a decided to sew the sides fully to hug the hips down instead.
Also, I have to say that I am not a huge of the length/shape of this sweater. Had it been a tad bit longer, it would’ve been ok – with added waist shaping. And would it have been shorter, it would’ve made an amazing boxy cropped top. But I find that this one sits at a very weird length on me, so if I make this again, I will probably make adjustments to the length and possibly also use a slightly smaller yarn with a bit more weight and body – I think that would suit the pattern much better. And I really want to clarify that this is in no way a critique of the pattern itself (it is well written, clear and more than anything – free!!) but more of a word of caution to myself if I want to attempt this a second time.
Anyways, moving on to the yarn now. I had bought this yarn a little while ago, and although I am usually not a Noro fan, I thought would give it another try since kind of liked the colour scheme of the Akoya Haze colourway. Well, as luck would have it, I am still not a fan. The yarn is soft, but a bit too poofy and frail for me. And the colours didn’t knit up as I expected they would. So either I really am not a fan of Noro yarns period or maybe I just haven’t found yet what kind of projects these funky textured and colourful yarns should be used for. Either way, there is still room for experimenting as I still have almost two skeins of this left, and we’ll see how things go.
Either way, all things considered, I think you’ll understand that although I can’t say this vest is a disappointment by any means, I just don’t seem to like it as much as I would’ve wished to. I am not 100% sure whether or not I will really wear this so I guess only time will tell! As always, all the details of this project are available on my Ravelry project page so feel free to take a look there if you’re interested, and don’t hesitate to reach out or share any of your experiences!
Have you ever made a project that you ended up having mixed feelings for? Did your first impression stay true or did you grow to like the project in the end?
Until next time peeps 🙂
Today, beautiful warm summer weather is taking a break, as gray clouds and rain roll over my little town. It is not unlike my mood in the recent weeks, as I’ve been feeling a little bit stressed and under the weather. But that is nonetheless why it makes me happy to share with you this beautiful shawl I completed last week, another test for the lovely Beatriz from SambaKnits. This beauty is called the Jupiter shawl, and although the pattern is not out yet, I just simply couldn’t wait to share it with you all.
The pattern calls for roughly 650 yards of fingering weight yarn in two colours, about 400 yards in one and 250 yards of the other. It alternates plain lace sections with striped garter stitch sections in a beautiful asymmetrical crescent shape. The pattern provides both written and charted instructions, and it is a very simple and straightforward pattern to follow. This one was fun and such a quick knit!
As Beatriz was flexible with yarn weight substitutions, I opted for a skein of handspun I completed last summer and matched it up with 3 skeins of Fiber Co.’s Acadia yarn I had in stash. The combination was perfect, as both yarn contained this lovely, soft creamy blueish green. I had enough yarn to add a few rows to this shawl, making it a tad bit larger than the pattern called for. As always, all the information on yardage and length added can be found on my project page so feel free to take a look at it there if you’re interested.
Overall I’m super happy about this shawl as it is soft, squishy and buttery, and I really can’t wait for the weather to cool down enough for me to sport this one out!
In other news, I tried paddleboarding last week and it was so, so much fun!
Also there may be something on the loom at the moment, so I might have some exciting weaving experience to share in the next future.
So something really fun happened this summer. I’ve been following the lovely Juliana from http://kleidermache.blogspot.com/ for quite a while, and when she posted a fabric destash on Instagram, I couldn’t resist getting a few pieces for myself. It’s not every day you get a chance to lay your hands on vintage fabric from Germany you know (especially in a travel-restricting pandemic..!!) and a few of those gorgeous fabrics were literally calling my name.
The first one that drew my eyes in was the floral on the left side, then decided to add a stiffer cotton stripe canvas to the package. At first I really thought I would use the stripes to make a pair of loose, wide legged beach pants. I was pretty sold on the idea, and while waiting for the package I started browsing patterns, trying to find something that would fit the image I had in my head.
But then, I completely changed my mind when I received the package. First, let me just say that when I got this in the mail, it felt even more exciting than Christmas! So much joy and excitement and happiness! Also, knowing how much I love pattern and stripes, Juliana added a few more in the mix, and a lovely note. I have no words to express how grateful I am! This package was everything I could have ever wanted and some more!
So once I could hold the stripes fabric in my hands, and after turning it over a few times and giving it a good wash, somehow, it just screamed “Dungarees” to me. I don’t know why… I don’t have any dungarees in my wardrobe. That’s not something I usually really wear. And I didn’t even have a dungarees pattern in my collection. I’ve been very well resisting the dungarees trend so far! But this fabric… Somehow… Was really calling for it. And in the same time period, a friend of mine also post a super cute picture of herself in blue dungarees. So that was it… I was sold. It had to be dungarees!
I had seen before the Heyday Dungarees pattern from MBJM, and I thought this might be a good start for what I wanted to do. I thought the loop and straps closure on the front was the cutest thing ever, and the pattern seemed simple enough. I did make a couple changes though, especially on the pockets. I’m not a huge fan of patch pockets on the front, so I dropped the chest pocket altogether and slightly altered the pattern to create side pockets instead. I also cropped the leg as I was working on a limited amount of fabric and didn’t have enough for a full legged one. With all that being said, here it is folks, in all it’s glory! My vintage stripes dungarees!