In the blink of an eye, the warm and sunny days have been replaced by gray, rainy and chilly fall weather here in Quebec, and I just kind of find myself confused asking “Where did summer go?” “How can it be mid-September already?”. Am I the only one feeling that way? I think covid is affecting our time perception in strange ways!
Anyways, the colder weather has prompted me to start working on more weather-appropriate projects, including this colourful Brioche Vest from Purl Soho knitted in Noro’s Shinryoku yarn.
I made this vest in size 33 1/2”, except that I did not switch to size 5 mm needle as per pattern instructions as the vest was already more than big enough on the 4.5 mm needle. The only couple small modifications I made on this pattern were to sew the sides fully and to leave the shoulder stitches on hold instead of binding them off and closed the front and back with a 3 needle bind-off. The pattern is clear and straight forward, although if I do make this again I think I might work it in the round and separate the front and back after the first set of decreases instead. Interestingly enough, the one thing that attracted me to this pattern was the slits on either sides, but after trying it out on me (and this may just be due to how the fabric falls with the yarn I used) I did not like the fit of them on me, I thought it made me look like a potato bag -which, as you can imagine, was not the intended goal. So a decided to sew the sides fully to hug the hips down instead.
Also, I have to say that I am not a huge of the length/shape of this sweater. Had it been a tad bit longer, it would’ve been ok – with added waist shaping. And would it have been shorter, it would’ve made an amazing boxy cropped top. But I find that this one sits at a very weird length on me, so if I make this again, I will probably make adjustments to the length and possibly also use a slightly smaller yarn with a bit more weight and body – I think that would suit the pattern much better. And I really want to clarify that this is in no way a critique of the pattern itself (it is well written, clear and more than anything – free!!) but more of a word of caution to myself if I want to attempt this a second time.
Anyways, moving on to the yarn now. I had bought this yarn a little while ago, and although I am usually not a Noro fan, I thought would give it another try since kind of liked the colour scheme of the Akoya Haze colourway. Well, as luck would have it, I am still not a fan. The yarn is soft, but a bit too poofy and frail for me. And the colours didn’t knit up as I expected they would. So either I really am not a fan of Noro yarns period or maybe I just haven’t found yet what kind of projects these funky textured and colourful yarns should be used for. Either way, there is still room for experimenting as I still have almost two skeins of this left, and we’ll see how things go.
Either way, all things considered, I think you’ll understand that although I can’t say this vest is a disappointment by any means, I just don’t seem to like it as much as I would’ve wished to. I am not 100% sure whether or not I will really wear this so I guess only time will tell! As always, all the details of this project are available on my Ravelry project page so feel free to take a look there if you’re interested, and don’t hesitate to reach out or share any of your experiences!
Have you ever made a project that you ended up having mixed feelings for? Did your first impression stay true or did you grow to like the project in the end?
Until next time peeps 🙂
Third time’s the charm?
Or not. But then again, maybe. I just recently finished my third Askews Me Dickey from Stephen West, and although it definitely is my favorite one of the bunch, it is also the one that looks the least like what I was expecting it to? Just hear me out here.
Askews me Dickey is a DK weight brioche cowl pattern worked on 4.5mm needles. It is a very structured cowl with a long slanted neck and a very wide yoke. Here’s a picture of the two first cowls I made using this pattern, and you will immediately see what I mean by “structured”.
The two times I made this cowl in the past, it was always a black yarn in the background and a red or a purple-ish color on top, and both times the cowl turned out nice and firm, stretchy and comfy but slightly too large around my neck/face.
Be that as it may, I wasn’t planning on making a third one of this, because I don’t wear cowls all that often (and I just finished the lissome cowl that I’m very much looking forward to wearing), but while I was going through my box of leftovers for another project, I found a couple balls of leftover Eucalyptus yarn from Mary Maxim.
Most of you probably have no idea what that yarn is because it’s been discontinued for a while and I really don’t think it was all that popular, but I have used it twice in the past for a shawl and a cowl (made respectively in the gray & the natural color). For those who have never seen it, it’s an insanely soft and luscious yarn composed of 50% acrylic and 50% viloft, a natural fiber made from Eucalyptus. The yarn is super soft and pliable, it behaves a little bit like bamboo with a nice stretch but has a much heavier weight to it which makes it feel much more decadent. Honestly, I can’t even find the words to describe it – that’s just how much I love this yarn. Anyways, you can probably imagine that when I saw I had some of this leftover in two colors, I just HAD to find something to do with it, and since I had very little of both colors, I thought it’d be a great fit for a brioche cowl.
Obviously this yarn is much finer that what the pattern calls for, being a sport weight yarn rather than a DK. But knowing the cowl turned out a tad too large both times I’ve made it in the past, I thought it’d be perfect with this and a smaller needle. I settled on a 4mm, and looking back I probably should’ve went down to a 3.75 or 3.5mm needle.
Either way I knitted this up in just a few days since it is such a quick knit, but as I went, I realized that the very soft and pliable yarn was not responding very well to the structure of the cowl. I still finished it though, figuring that it might turn out ok once I had the yoke completed, but it really didn’t give any more body to this cowl. I looked at the finished product in dismay, I stuffed it in a bag and let it sit there for a few days before I came around to it. You see, I had so many expectations for this cowl and it just didn’t turn out the way I thought it would so I felt a bit sad, disappointed and apprehensive of how it would look like on me.
When I finally did try it on though, I realized that I liked this cowl all the same, and that it was OK that it didn’t turn out the way I thought it would. Lesson learned. Sometimes, life has a different plan for you. What do you guys think? Have you ever put time and effort in a project only to realize it didn’t become what you had envisioned? Did you get disappointed? Were you able to come around? Let me know!
And as always, if you’re interested in the cowl, feel free to check out my project page on Ravelry.
Long time coming.
These past few days I feel like I’m finally starting to get my knitting mojo back, although it’s been a very long journey and I guess for now I don’t really have much to show for it, but that’s okay! Today, I want to share with you the latest piece I completed, which is a redish/black version of Stephen West’s Askews Me Dickey cowl that I started back in January. Ain’t it just lovely?
Ravelry is telling me it took a bit over a month to complete this project, which really is somewhat laughable compared to the whopping two days it took me to complete this cowl the first time around in 2016, but I’m alright with that. Since work has been so busy lately and my personal schedule’s been a bit overloaded, I’ve barely been knitting at all these past few months, but I’m glad to report that more than half of this cowl has been knitted in the last 7 days, so I guess I’m starting to adjust and pick up some speed again. I basically made the same mods as the first time I knitted this pattern, which is to work less repeats of the pattern in the neck section and cast-on with color B only instead of a two color cast-on like the pattern calls for. As always, you can find all the details and yardage on my project page, so go check it out if you’re interested.
The timing works out quite right since there’s a few more weeks of winter coming and I’ll definitely get to wear it before spring comes around, but more than anything I’m just really happy to have finally finished something!
That’s all for now folks, until next time 🙂