Folks, I’ve been loving my new Heyday Dungarees so much that the fall weather setting in had me so very bummed I couldn’t wear them anymore (damn those cute cropped legs!) so I’ve decided to whip up another pair of overalls, this time with full length legs so they could be worn this fall / winter.
I used what I’m assuming is a cotton blend in a flowery print I’ve had in stash for the longest time, and I’ve added white accents for the loops, front pocket and side pockets.
I used the same Heyday Dungarees pattern from MBJM, this time around I installed a pocket on the front and omitted the ones on the back and I used the same sort of hack for the side pockets as I did on the first one. Last time I used this fabric, I was under the impression that this fabric had a bit of stretch but turns out it didn’t really, so the final product ended up a bit tight around the hips but I just simply love it nonetheless! It’s cute, comfy and so playful, and I’m sure I’ll get a lot of wear out of it in the next few months.
How’s fall treating you guys?
Today, beautiful warm summer weather is taking a break, as gray clouds and rain roll over my little town. It is not unlike my mood in the recent weeks, as I’ve been feeling a little bit stressed and under the weather. But that is nonetheless why it makes me happy to share with you this beautiful shawl I completed last week, another test for the lovely Beatriz from SambaKnits. This beauty is called the Jupiter shawl, and although the pattern is not out yet, I just simply couldn’t wait to share it with you all.
The pattern calls for roughly 650 yards of fingering weight yarn in two colours, about 400 yards in one and 250 yards of the other. It alternates plain lace sections with striped garter stitch sections in a beautiful asymmetrical crescent shape. The pattern provides both written and charted instructions, and it is a very simple and straightforward pattern to follow. This one was fun and such a quick knit!
As Beatriz was flexible with yarn weight substitutions, I opted for a skein of handspun I completed last summer and matched it up with 3 skeins of Fiber Co.’s Acadia yarn I had in stash. The combination was perfect, as both yarn contained this lovely, soft creamy blueish green. I had enough yarn to add a few rows to this shawl, making it a tad bit larger than the pattern called for. As always, all the information on yardage and length added can be found on my project page so feel free to take a look at it there if you’re interested.
Overall I’m super happy about this shawl as it is soft, squishy and buttery, and I really can’t wait for the weather to cool down enough for me to sport this one out!
In other news, I tried paddleboarding last week and it was so, so much fun!
Also there may be something on the loom at the moment, so I might have some exciting weaving experience to share in the next future.
Ahhhhhh July. The warm weather, the sun, the luscious green leaves, the flowers, the… forest fire warnings? The mosquitos? Ok, let’s move on. Amidst the quarantine and the COVID-19 pandemic, the weather here this summer has been exceptionally warm and beautiful so far, which made me want to create this little flowery piece of summer here.
This dress was made using the Vogue pattern 8667, a very simple straight forward dress that was just perfect for this light and airy flowery piece of cream and blue fabric I’ve had in stash for the longest time.
I chose view C, with the A-line pleated skirt, the short sleeves and no collar. I did end up having to make a few modifications to the pattern though, so let me run you through these very quickly.
First of all, I had bought this pattern ages ago, and noticed that the sizes included in the pattern were 16-24. Now that I’ve lost a lot of weight, I more would’ve needed something around size 14 or a little bit below, so I had to adjust the pattern accordingly. I did my best and I think it turned ou pretty good, but I did have to pinch up around the collar as I thought the neck opening was still a bit too large after a sewing it up. I think it actually adds some charm to the dress though, so I guess it’s kind of a happy mistake!
The other major modification that I made was on the skirt. I didn’t have quite enough fabric for the two-piece pleated skirt but still wanted an A-line instead of a straight skirt, so I used the lining piece to cut the front fabric instead of the pieces that were provided in the pattern for the pleats. I wish I would’ve had enough fabric to make the pleated version, but I still really love this dress and I think the basic A-line skirt also works very well.
The entire thing was lined to perfection with a dusty blue cotton, and I added a simple little sash in the same solid blue fabric to break up the business of the pattern. I have so much love for this dress you guys, I know for sure I will be wearing the hell out of it!
What have you guys been up to so far this summer?
Or not. But then again, maybe. I just recently finished my third Askews Me Dickey from Stephen West, and although it definitely is my favorite one of the bunch, it is also the one that looks the least like what I was expecting it to? Just hear me out here.
Askews me Dickey is a DK weight brioche cowl pattern worked on 4.5mm needles. It is a very structured cowl with a long slanted neck and a very wide yoke. Here’s a picture of the two first cowls I made using this pattern, and you will immediately see what I mean by “structured”.
The two times I made this cowl in the past, it was always a black yarn in the background and a red or a purple-ish color on top, and both times the cowl turned out nice and firm, stretchy and comfy but slightly too large around my neck/face.
Be that as it may, I wasn’t planning on making a third one of this, because I don’t wear cowls all that often (and I just finished the lissome cowl that I’m very much looking forward to wearing), but while I was going through my box of leftovers for another project, I found a couple balls of leftover Eucalyptus yarn from Mary Maxim.
Most of you probably have no idea what that yarn is because it’s been discontinued for a while and I really don’t think it was all that popular, but I have used it twice in the past for a shawl and a cowl (made respectively in the gray & the natural color). For those who have never seen it, it’s an insanely soft and luscious yarn composed of 50% acrylic and 50% viloft, a natural fiber made from Eucalyptus. The yarn is super soft and pliable, it behaves a little bit like bamboo with a nice stretch but has a much heavier weight to it which makes it feel much more decadent. Honestly, I can’t even find the words to describe it – that’s just how much I love this yarn. Anyways, you can probably imagine that when I saw I had some of this leftover in two colors, I just HAD to find something to do with it, and since I had very little of both colors, I thought it’d be a great fit for a brioche cowl.
Obviously this yarn is much finer that what the pattern calls for, being a sport weight yarn rather than a DK. But knowing the cowl turned out a tad too large both times I’ve made it in the past, I thought it’d be perfect with this and a smaller needle. I settled on a 4mm, and looking back I probably should’ve went down to a 3.75 or 3.5mm needle.
Either way I knitted this up in just a few days since it is such a quick knit, but as I went, I realized that the very soft and pliable yarn was not responding very well to the structure of the cowl. I still finished it though, figuring that it might turn out ok once I had the yoke completed, but it really didn’t give any more body to this cowl. I looked at the finished product in dismay, I stuffed it in a bag and let it sit there for a few days before I came around to it. You see, I had so many expectations for this cowl and it just didn’t turn out the way I thought it would so I felt a bit sad, disappointed and apprehensive of how it would look like on me.
When I finally did try it on though, I realized that I liked this cowl all the same, and that it was OK that it didn’t turn out the way I thought it would. Lesson learned. Sometimes, life has a different plan for you. What do you guys think? Have you ever put time and effort in a project only to realize it didn’t become what you had envisioned? Did you get disappointed? Were you able to come around? Let me know!
And as always, if you’re interested in the cowl, feel free to check out my project page on Ravelry.
I just recently finished my own version of Jennifer Dassau’s Vamping shawl pattern, a very popular choice among knitters for gradient yarns, and I am very pleased to report that it is just as wonderful of a pattern as people make it out to be. I mean, look at those sexy lines!
Now you see I’ve had this gorgeous 100% merino gradient yarn from The Blue Brick in my stash for a few years, over 3 I think, and I wasn’t really sure what to do with it. This yarn base called “Manitoulin Merino” (discontinued now – and the colorway, which was called “rose”, has also been discontinued since I think) is just insanely soft and pliable, but it is a single, and as such tends to be quite fragile so I wanted to keep it for something delicate that wouldn’t be subjected to too much wear.
As such, a shawl was very well suited, but I couldn’t for the life of me choose which pattern I wanted to make with it. I’ve already made an Iron Maiden, a Glitz at the Ritz, a couple Sunwalker from Melanie Berg, I’ve also made a Bosc Pear and most recently a Winterlight that would all have been very well suited for a gradient yarn and which I have all loved knitting. But I guess I just really wanted to try something new, ideally a different type of structure that would be a bit different from the traditional half circle or triangular shawls; something with a different architecture that would present the gradient in a different and original way.
And Jennifer Dassau’s Vamping is just that. The structure is interesting with central decreases instead of being at the beginning or the end, and it creates sort of a “V” pattern that is very fresh (at least in my mind) compared to so many other patterns out there. So I gave it a shot, and I am very pleased to report that the result is simply stunning. The pattern is very simple, but it does require to pay attention at least a little bit on the couple lace rows, which I have to admit I did not do. Consequently, I messed up in a couple places here and there, but the pattern is very forgiving and I don’t think it shows too much (I never ever use life line, and couldn’t be bothered to frog and fix it, so yea ^^). As always, all the details are on my project page so you can go check them out there.
All in all, I would most certainly make this pattern again, as I think it would be a great way to feature any gradient or handspun yarn you cherish.
While the weather lately here has been oscillating on wide cycles ranging from rain and freezing rain to heavy snow and extreme cold, I’ve just been busy trying to get back into an exercise routine, chipping ice off the patio steps and finishing up some projects, all the while wishing spring was here already.
And the project I’m going to show you today is just that: the sincere, deep and heartfelt expression of me looking forward to end of winter.
I started this project late in November as a test knit for the lovely Beatriz from SambaKnits and it’s bright, it’s light, it’s airy, it’s leafy; all things spring that I so wish to see. The pattern is yet to be published, but once it is, it will be linked to my Ravelry Project Page. The pattern, that offers both written & charted instructions, is well designed, clear and easy to understand. The design is very elegant with asymmetrical lace sections sprouting from opposite corners of the wrap, and although some things I would have done differently, the pattern is built in a way that is easy to alter if you wish to change the width, the length, or alter the lace increases or decreases.
The yarn I used is Malabrigo’s Silkpaca in the “pollen” colorway. It’s a lace weight yarn, and I must say that I don’t particularly like working with lace weight yarns since they are so thin and so flimsy, but this one is especially soft and absolutely stunning so it made it all worth it!
With this shawl done, I still have a couple more projects on the needles that I would like to complete this month, namely here a little chevron lap throw and a second Dessine-Moi Un Mouton so please look forward to it in the next few weeks as I’ll be sharing my progress on both these projects soon.
Oh, 2018… What a year! You’ve been full of new challenges and experiences, full of hopes and dreams, and so very, very fulfilling! Although it doesn’t show so much here on the blog (or on my Ravelry page… Yikes!) 2018 has been a very good year to me, both personally and professionally, and it felt good to reflect on it while cozily drinking some hot cocoa by the fire at my in-laws. I lost a lot of weight, made some lifestyle changes, advanced my career and I’ve been working a lot on myself to become a more positive and grounded person. I was also blessed with the chance to go on two amazing (life changing!) trips to Asia and was fortunate enough to meet many kind and generous people I’m lucky to call friends.
On the blogging & crafting front, I did very little knitting in the first half of 2018 but worked on many sewing projects whereas I’ve been knitting more and sewing less in second half of the year.
All in all, Ravelry told me that I’ve completed 9 projects in 2018, totaling 4715 yards of yarn. That’s 2 more projects than what I did in 2017, although it represents 766 yards less. To that though, I think we can also add the second Solace sock I had to reknit from the previous year to complete the pair, as well as a couple WIPs I’ve been making serious progress on, but simply couldn’t finish before the year end. There’s first a bulky weight chevron lap blanket that’s about 75% done, and a beautiful lace shawl that I’ve been working as a test-knit for the lovely Beatriz Rubio (Sambaknits).
Doesn’t it look just lovely? I’m about 70% done now, so this project may be the very first you’ll get to see completed on the blog this year – please look forward to it!
For 2019, I wish to simply continue working on the same goals, namely here get fit and eat healthy, be positive and grounded and be kinder to myself and others. There might be some big changes coming my way in 2019, so there might be a lot to share in the upcoming months.
Until then folks, I wish you all the best for 2019. Cheers!
So many projects, so little time!! Last weekend, I finally finished a sweater that has been on the needles since May 2017 (ahem!..) and I’m so happy it finally came together! Not only is it another project I can check off the WIP list, but it’s also a really pretty and cozy sweater, right on time for the cold season.
The pattern is (of course!) Tin Can Knits’s beautiful Snowflake, and the yarn is some Berroco Folio yarn I had in stash in color “Raspberry coulis” and “tan”. Since I had only a couple skeins of each, I decided on a striped version of the sweater to maximize the use of every yard. I ended up using all but 3 grams of the tan and 13 grams of the purple. As always, all the details on the yardage, striping sequence and mods can be found on my project page so take a look at them there if you’re interested!
Now this is my second snowflake sweater, but I haven’t been able to wear the first one that I made 4 years ago at all recently because I’ve lost a lot of weight and the bottom half of the body has been incredibly loose and shapeless. I’m very happy to have this model on my sweater rotation again, but I’ll definitely have to do something about the older one at some point this winter.
I think it should be an easy fix, since I could probably just pick up stitches around the waist where it still fits, frog the bottom half and re-knit it with less hip increases (or none at all). Whatever I do, I’ll make sure to keep you posted on my sweater surgery, so wish me luck!
Now if you don’t mind I’ll go back to my needles, because I definitely got some catching up to do before the year is over!
Life is cold… SO COLD! *tears*
Guys, temperatures here in Quebec have been dropping as fast as the daylight hours have been shrinking, winter has been slowly creeping in as we’ve experienced the first snow falls of the season.
Amidst it all, the only that’s been able to provide me any sort of comfort is a cozy knit curled up with a blanket on the couch, so today I would like to show you one of my latest FOs, a Winterlight shawl by Meg Gadsbey made with The Blue Brick‘s Killarney Sock gradient yarn in the “Waterfall” colorway.
This shawl was a very fast knit because the pattern is so cleverly designed to provide interesting and varied sections with minimal effort by maximizing the use of the simple knit stitch. Most rows of this pattern are actually just plain knitted, making this pattern extremely easy to memorize and very fast to knit. It’s also a great pattern to show off a gradient or a hand spun, so I am sure that I will make many more of this in the future.
I added a few plain rows at the end since I had a bit more yarn that what was needed, but I basically just followed the pattern the entire way through. There’s no need to fix something that’s already perfect! As usual all the info and yardage can be found on my project page, so take a look there if you’re interested.
Thank you all for reading, and I’ll see you again in a couple weeks for a little travel update 🙂
I’ve been back from Japan for about 10 days now, and I gotta tell you, I miss it so bad
Everything from the sights and the sounds, the food, the feel of the air, the atmosphere, the people; I think I really crushed hard on Japan during those two short weeks and now that I’m back it’s really hitting me in the feels! Nevertheless though, I’ve been pretty busy here, at work and at home, as I slowly readjust to my everyday life.
What I want to share with you all today is a little project that I couldn’t share with you before leaving for Japan, and that would be this little cute Camilla baby Blanket.
You see, one of my Japanese penpals, Eriko, is currently pregnant and since she was kind enough to spend two days showing me around Kyoto and Osaka, I wanted to bring her a little something special for her little-one-to-be. So a couple weeks before my trip, I started this cutie little blanket for her using the three skeins of Brown Sheep’s Cotton Fleece that I had on hand. Since I don’t know whether the baby is a boy or a girl, I figured a neutral blueish gray would be fine.
Since I’ve already bought the Camilla Pullover pattern in the past, I did not buy the actual Camilla Blanket pattern but instead used the instructions for the fan pattern from the pullover that I first converted to RS/WS instructions, repeated 4 times and added a garter stitch border on the top, bottom and edges.
The finished blanket is about stroller size, measuring about 30″X32″. Since I was using a Worsted weight yarn instead of Aran, I worked the blanket on 5 mm needles instead of the recommended 6.5 mm. I don’t work very often with needles over 4 mm, so I took advantage of this opportunity to try the Kollage square needle that I had received as a sample a couple years back but never got a chance to use. Although I was a bit skeptical at first, I must admit that I was actually quite pleased by the grip and the feel of those square needles, and it felt very natural to use. Actually, I enjoyed working with it so much I think I might seriously consider getting them in other sizes, or maybe even by the interchangeable set.
All the details, save for the actual fan motif, can be found on my project page so feel free to check it over if you’re interested.